Packaged high-voltage switchgear are designed for reception and distribution of the power of three-phase 50Hz up to 35 kV AC in networks with insulated or grounded via arcing ground suppressor neutral. The enterprise manufactures packaged switchgear for rated voltage 6 (10) kV, 20 kV, and 35 kV. Prefabricated one-side service chambers ("KSO") is a subset of packaged switchgear ("KRU"). Depending on the type of built-in switching devices the enterprise manufactures one-side service chambers of 2xx series and one-side service chambers of 3xx series. One-side service chamber is a metal structure made of 2 mm thick steel (bearing structures are 3 mm thick). All components are painted with powder paint.

Kaskad series LV packaged distribution and control devices can be used as switchgear in all areas of energy consumption, where it is required to provide entry and distribution of electrical energy, in particular: - auxiliary system for all types of power stations; - to bundle the power grid substations; - to bundle the substations of gas/oil line pumping stations; - in power supply and automation systems of industrial enterprises and municipal services. The basic concept of the Kaskad LV modular switchgear is use of typical modules in electric switchboards. Chambers of different configurations can be manufactured from relatively small number of standard components. Versatility of the modular system makes assembling and installation of electric switchboards more simple and easy. Using unitized individual modules, switchgear of any type can be built using hardware manufactured by Schneider Electric, ABB, LS IS, Hyundai, Eaton, KEAZ JSC, and Kontaktor. There are withdrawable and stationary units in Kaskad LV switchgear design. Kaskad LV switchgear design can be used to build the following switchgear: - main switchboard; - LV switchgear cabinets; - control station panel; - auxiliary service panel.

DC switchboard is part of the auxiliary DC system and is designed to provide uninterrupted power supply to auxiliary control, protection, automation, and alarm circuits, relays of switching devices, emergency lighting, spare oil pump motors, and synchronous condensers at facilities of power and oil & gas industries, traction substations of railways, and industrial enterprises. DC switchboard is intended for operation in such facilities as: - power plants, - substations, - oil refineries, - chemical enterprises, -railway transport facilities, - gas-compressor stations.

VIBRO-LASER offers functionality and its high technical characteristics, making alignment process of your equipment (pump, electric motor, compression etc.) quick and exact, thus reducing its energy consumption and increasing service life.

«CHETA» manufactures packaged low-voltage complete devices (LVCD’s) with fixed and withdrawable units based on GOST R 5132-2007, that’s simplified designing and supporting.

The ACP for the reactive power compensation series AKU is made according to GOST 27389-87. It is intended for power factor increase in automatic and semi-automatic modes during connecting to power line at the transformer substation or directly to the consumer. There are modifications with orificing. Current settings and pick values of measured values are saved in a non-volatile memory, it is important for sudden or planned power loss.

GIS - is high-voltage switchgear gas-insulated three-phase version of the type GFM-126, and in phase design type B-105, intended for reception, distribution and transmission of electric energy in AC power, frequency 50 Hz and with voltage of 110 kV and 220 kV, respectively.

Enclosure KSO-212M are designed for use in three-phase AC electrical installations, frequency 50 Hz, voltage 6 and 10 kV systems with insulated or grounded neutral through arcing reactor.