HygroScan process gas analyzers are explosion-proof and their purpose is to automatically determine water vapor content and further calculate water dew point (WDP) in gaseous media, including natural gas according to ISO 18453, ISO 6327. Structural features Analyzer operating principle: sorption capacity; WDP is calculated for gas operating pressure and may be recalculated based on required pressure value, due to integrated analyzed gas pressure sensor; Measurements are done at sample operating pressure up to 25 MPa; All analyzer models are explosion-proof.

The Aerosol Disinfection Equipment creates a cloud of dry fog, provides spraying of microparticles of a disinfectant chlorine-free liquid throughout the entire volume of the treated room.

Process Oxygen Analyzers AnOx are intended for oxygen volume ratio measurement in gas fluid, including in natural gas and data transfer to external devices. Adjustment of the analysis conditions, data collection, data processing, processing and storage of the results of the performed analyzes are carried out using the embedded software. The operation principle is based on the determination of oxygen in natural gas using an electrochemical detector (ECD). Depending on the type of oxygen sensor installed, the measurement ranges can vary from 0-500 ppm to 0-100% by volume. Main Features: Electrochemical sensor with high sensitivity Wide detection range (from ppm level to 100%) Fast response Superior accuracy Simple design, easy installation and operation Explosion protection for all modifications

Explosion-proof process analyzer is made to measure mass content of mercaptans based on ethyl mercaptan concentration in gaseous media, including natural gas, with further calculation and scoring odor intensity and data transmission to external devices. Odor intensity is calculated proportionate to mercaptan concentration. Analyzer may be used in gas metering systems, within state metrological control and supervision distribution, including for natural gas quality control. Its principle of operation is based on determination of mercaptan medium concentration in natural gas using electrochemical detector (ECD) and separating the interfering component, which is hydrogen sulfide.

The mercury analyzer is designed for continuous measurements of the mass concentration of mercury vapor in natural and process gases. Advantage: Determination of atomic mercury by atomic absorption