 |
The medical ventilator for newborns SLE 2000
The device is intended for conducting controlled artificial ventilation of the lungs of newborns and children in the process of resuscitation in the conditions of clinical hospitals, maternity homes, children's research institutes. The unique technology used in the device eliminates the need for exhalation valves, diaphragms and provides ventilation for patients weighing from 500 g to 20 kg. It refers to fans with pressure control and time switching (time-cyclic). It has all the necessary parameters for mechanical ventilation in full-term and deeply premature infants.
Part number:
Supplier:
Shvabe Description
The device provides support for a constant pressure waveform at all breathing frequencies, has an alarm system, has a built-in oxygen analyzer with a digital indicator and the ability to filter exhaled gases.
Modes of ventilation Off / Alarm Test, CPAP, CMV, PTV, SIMV
BRP (respiratory rate) 1 - 125 (126 - 250 with option Z0004)
Maximum inspiratory time, sec 0.1 - 3.0, (0.01 - 0.3 with option Z0004)
Inspiratory / expiratory ratio (I: E) from 9.9: 1 to 1:99
The flow pressure is weak or strong, set by switch
Manual breath gives a single breath in CPAP, CMV, PTV, SIMV mode
PTV sensitivity allowed maximum
Oxygen concentration 21 - 100% O2 ± 3%
Pressure mode switch max - average - minimum
Pressure in CPAP mode, mbar 0 - 15
Inspiratory pressure, mbar 0 - 60
Disable alarm for 60 seconds
Resetting alarms resets all alarms (excluding system errors)
Light indicators:
Network is green, network is on
System error red signal, error in the main processor
Backup trigger green signal, indicates the machine is breathing
Digital:
Breath rate monitor breaths per minute
Monitor inspiratory time inspiratory time
Inspiration / expiration ratio (I: E) inspiratory / expiratory value
Oxygen concentration,% from 21 to 100
Pressure, mbar from 0 to 62
Calibration:
Pressure calibrated, mbar 0 to 60 plus PEEP level
Anxiety:
CPAP visual and intermittent beeps
PIP / cycle error / low visual and intermittent beeps
Loss of main power battery power, beep
Loss of air or oxygen supply pneumatic, sounds from a blender
System error visual and intermittent beeps
Equipment, size and weight:
Inlet pressure of air and oxygen, bar 3 - 5
Voltage 100-120 V, 50/60 Hz; 220-240 V, 50/60 Hz
Power, W 20
Fuses 100-120 V = T500 mA 220-240 V = T200 mA
Protection Class I Type B
Dimensions (machine only), cm 37 (length) x 31 (height) x 32 (width)
Stand height, cm 137
Fan weight, kg 10
Modes of ventilation Off / Alarm Test, CPAP, CMV, PTV, SIMV
BRP (respiratory rate) 1 - 125 (126 - 250 with option Z0004)
Maximum inspiratory time, sec 0.1 - 3.0, (0.01 - 0.3 with option Z0004)
Inspiratory / expiratory ratio (I: E) from 9.9: 1 to 1:99
The flow pressure is weak or strong, set by switch
Manual breath gives a single breath in CPAP, CMV, PTV, SIMV mode
PTV sensitivity allowed maximum
Oxygen concentration 21 - 100% O2 ± 3%
Pressure mode switch max - average - minimum
Pressure in CPAP mode, mbar 0 - 15
Inspiratory pressure, mbar 0 - 60
Disable alarm for 60 seconds
Resetting alarms resets all alarms (excluding system errors)
Light indicators:
Network is green, network is on
System error red signal, error in the main processor
Backup trigger green signal, indicates the machine is breathing
Digital:
Breath rate monitor breaths per minute
Monitor inspiratory time inspiratory time
Inspiration / expiration ratio (I: E) inspiratory / expiratory value
Oxygen concentration,% from 21 to 100
Pressure, mbar from 0 to 62
Calibration:
Pressure calibrated, mbar 0 to 60 plus PEEP level
Anxiety:
CPAP visual and intermittent beeps
PIP / cycle error / low visual and intermittent beeps
Loss of main power battery power, beep
Loss of air or oxygen supply pneumatic, sounds from a blender
System error visual and intermittent beeps
Equipment, size and weight:
Inlet pressure of air and oxygen, bar 3 - 5
Voltage 100-120 V, 50/60 Hz; 220-240 V, 50/60 Hz
Power, W 20
Fuses 100-120 V = T500 mA 220-240 V = T200 mA
Protection Class I Type B
Dimensions (machine only), cm 37 (length) x 31 (height) x 32 (width)
Stand height, cm 137
Fan weight, kg 10