1. Machine drilling, milling and boring five-coordinate:

- three-axis table

table surface dimensions (LxW) 560x500 mm

general dimensions of the table (with the additional overhead table) 1340x500

the maximum mass of the workpiece 600 kg

- rotary two-axis table (globe) Ø500 mm

the maximum mass of the workpiece 500 kg

- the largest programmable movement in the coordinates X 1100; Y 500; Z 450

2. Machine three-axis vertical milling and boring:

- dimensions of the table surface (LxW) 1250x600 mm

- the maximum mass of the workpiece 600 kg

- the largest programmable movement in the X 1000 coordinates; Y 570; Z 600

3. Machine three-axis vertical milling and boring:

- dimensions of the table surface (LxW) 1600x800 mm

- the maximum mass of the workpiece 800 kg

- the largest programmable movement in the coordinates X 1400; Y 780; Z 1000

4. Horizontal lathe with milling function:

- the largest diameter of the workpiece, installed above the frame 500 mm

- the greatest length of processing is 600 mm

- the largest diameter of processing (shaft) 200 mm

- the largest diameter of processing (disks) 300 mm

- the largest programmable movements (Z axis) 650 mm

- the largest programmable movement (axis X) 250 mm

5. Coordinate punch press:

- maximum dimensions of the workpiece (DhSh) 2500h1250 mm

- maximum workpiece thickness 6 mm (for steel with a resistance of 40 kg / mm2)

6. Bending press:

- maximum dimensions of the workpiece: length 3050mm, width without restrictions (limited by auxiliary devices for feeding the sheet into the bending zone)

- maximum workpiece thickness 6 mm (for steel with a resistance of 40 kg / mm2)