.jpg) |
Polypropylene hoods
The polypropylene exhaust hood is designed for chemical processes with solutions of aggressive acids and alkalis. The upper part of the cabinet is made of polypropylene and equipped with a movable glass with a balancing system, illuminator and ventilation suction. The lower part of the cabinet is made of metal and coated with a chemically resistant polymer coating and equipped with a ventilated compartment for storing chemicals. The cabinet is equipped with roller bearings with clamps.
Part number:
Supplier:
The Ruselectronics holding companyDescription
Cabinet composition:
The technological bath (4 pcs.), Made of fluoroplastic (deaf) three of them, are equipped with a heating and temperature maintenance system. Bath volume 5-10 liters. Baths are easily removable. The heating system and maintain the temperature provides blocking from overheating.
Hot running rinsing bath. Bath material - polypropylene. The volume of a bath is 40 l. The bath is equipped with a flow water heater, shower head.
Under the baths is a polypropylene tray for collecting solutions in case of emergency leakage.
Technical characteristics:
Loading and unloading products from the bath - manual
Pouring technological solutions into baths - manually
All baths are equipped with lids.
Control panels provide control of key process parameters (temperature, time)
Overall dimensions of the cabinet not less than 1820x1060x2140 mm.
1. As a source of power, depending on the process, a wide range of DC and AC power units is used.
2. The galvanic line can be equipped with a local water treatment system that provides the required water quality.
3. High-quality cleaning and continuous filtration of electrolytes provide filtration units.
4. The environmental safety requirements of the line are provided by installations of non-reagent regeneration and utilization of metals from wash water.
The technological bath (4 pcs.), Made of fluoroplastic (deaf) three of them, are equipped with a heating and temperature maintenance system. Bath volume 5-10 liters. Baths are easily removable. The heating system and maintain the temperature provides blocking from overheating.
Hot running rinsing bath. Bath material - polypropylene. The volume of a bath is 40 l. The bath is equipped with a flow water heater, shower head.
Under the baths is a polypropylene tray for collecting solutions in case of emergency leakage.
Technical characteristics:
Loading and unloading products from the bath - manual
Pouring technological solutions into baths - manually
All baths are equipped with lids.
Control panels provide control of key process parameters (temperature, time)
Overall dimensions of the cabinet not less than 1820x1060x2140 mm.
1. As a source of power, depending on the process, a wide range of DC and AC power units is used.
2. The galvanic line can be equipped with a local water treatment system that provides the required water quality.
3. High-quality cleaning and continuous filtration of electrolytes provide filtration units.
4. The environmental safety requirements of the line are provided by installations of non-reagent regeneration and utilization of metals from wash water.