 |
EGES-12P GT Gensets
The gas turbine gensets are used to produce heat and power.They may be used both as the main and standby source of power supply, at base, semi-peak and peak loads, in a standalone mode or in parallel with other sources of power supply or power systems.
Part number:
Supplier:
Description
ISO conditions. Fuel* – natural gas, associated oil gas, liquid fuel
Gas turbine ГТУ-12ПГ-2
Nominal power at generator terminals, MW 12,3
Efficiency at generator terminals, % 32,6
Nominal electric current frequency, Hz 50
PT exit gas temperature, °С 496
PT exit gas flow, kg/s 45,9
Heat rate in a heat recovery cycle, Gcal/h 16,6
Total fuel utilization factor @ t exh = 110 °С, % 83,7
GT genset inlet fuel gas parameters: – pressure (gage), kgf/ cm2 24...30
GT genset inlet fuel gas parameters: – temperature range, °С + 5...+ 90
Equivalent noise level during maintenance, max dBA 80
GT genset lifetime: – MTBO, h 25 000
GT genset lifetime: – total, h 100 000
* - fuel composition shall be negotiated with UEC-Aviadvigatel
modular design – factory preassembled modules;
easy to install;
easy to maintain;
high reliability;
condition-based life extension possible.
Gas turbine ГТУ-12ПГ-2
Nominal power at generator terminals, MW 12,3
Efficiency at generator terminals, % 32,6
Nominal electric current frequency, Hz 50
PT exit gas temperature, °С 496
PT exit gas flow, kg/s 45,9
Heat rate in a heat recovery cycle, Gcal/h 16,6
Total fuel utilization factor @ t exh = 110 °С, % 83,7
GT genset inlet fuel gas parameters: – pressure (gage), kgf/ cm2 24...30
GT genset inlet fuel gas parameters: – temperature range, °С + 5...+ 90
Equivalent noise level during maintenance, max dBA 80
GT genset lifetime: – MTBO, h 25 000
GT genset lifetime: – total, h 100 000
* - fuel composition shall be negotiated with UEC-Aviadvigatel
modular design – factory preassembled modules;
easy to install;
easy to maintain;
high reliability;
condition-based life extension possible.