.jpg) |
Installation of the protective solder mask
Horizontal line of manifestation of protective soldering mask for the production of products with automatic adjustment :eight); possesses the possibility of preventive maintenance and replacement of elements of the transport system, nozzles, spray pipes and heaters without draining the solutions;
Part number:
Supplier:
The Ruselectronics holding companyDescription
Line LP-02 is designed for the manifestation of both dry film and liquid ZPM and is designed to work with solutions based on potassium or sodium carbonate. The line provides the ability to process products both by spraying and immersion. In the first module products are subjected to blasting. In the second module, where the clean solution is fed, KNEB-PP are processed by immersion, with the solution being fed from the bottom of the flooded slab.
The material used in the current production - foil dielectric type FR-4. Protective solder mask used in the current production ImaGure XV-501 T-4.
The system of continuous monitoring of the quality of the supply network provides the ability to set the settings for emergency events.
The material used in the current production - foil dielectric type FR-4. Protective solder mask used in the current production ImaGure XV-501 T-4.
The system of continuous monitoring of the quality of the supply network provides the ability to set the settings for emergency events.
Specification
1. Specification__RUS.docx