 |
Powerful white LEDs TmL
The TOMSLED series of LEDs (TmL-350-FXXX-XXXX-XX) is designed to create lighting products for office, street and decorative lighting. LEDs are manufactured in a metal-polymer housing suitable for both manual surface mounting and automated surface mounting. Diodes are made of white cold, white neutral and white warm glow colors. Do not contain lead!
Part number:
Supplier:
The Ruselectronics holding companyDescription
Maximum permissible direct forward and pulse direct current 700 mA
Maximum Permissible DC Reverse Voltage 5 V
Permissible static potential 2000 V
The maximum permissible transition temperature of the active element of the LED +125 ° C
Increased operating temperature of the housing +85 ° C
Lowered case working temperature minus 60 ° С
Relative humidity at temperature +25 ° С no more than 98%
When using LEDs, the polarity must be observed. Applying a constant reverse voltage exceeding 5
V to the LED can cause damage to the LED. When designing lighting products using LEDs,
eliminate current surges that destroy LEDs when the power source is turned on.
The use of LEDs with an additional heat sink is recommended.
The use of LEDs is recommended. When installing LEDs in a lighting product, in order to ensure
the greatest reliability and stability of optical characteristics during the service life, it is necessary to
minimize the thermal resistance at the junction area - the environment.
additional heat sink.
Solder LEDs to produce solder pastes. Below is a profile of the soldering process with solder pastes,
recommended for mounting LEDs in the product.
Maximum Permissible DC Reverse Voltage 5 V
Permissible static potential 2000 V
The maximum permissible transition temperature of the active element of the LED +125 ° C
Increased operating temperature of the housing +85 ° C
Lowered case working temperature minus 60 ° С
Relative humidity at temperature +25 ° С no more than 98%
When using LEDs, the polarity must be observed. Applying a constant reverse voltage exceeding 5
V to the LED can cause damage to the LED. When designing lighting products using LEDs,
eliminate current surges that destroy LEDs when the power source is turned on.
The use of LEDs with an additional heat sink is recommended.
The use of LEDs is recommended. When installing LEDs in a lighting product, in order to ensure
the greatest reliability and stability of optical characteristics during the service life, it is necessary to
minimize the thermal resistance at the junction area - the environment.
additional heat sink.
Solder LEDs to produce solder pastes. Below is a profile of the soldering process with solder pastes,
recommended for mounting LEDs in the product.
Specification
1. Specification__RUS.docx