 |
MR-8 geodesic satellite multi-frequency equipment
The multi frequency satellite geodetic equipment МР-8 is intended for surveying research, supervision of building process, high accuracy positioning during creation and development of reference geodetic networks and also for the purposes of cadastre, land management, agriculture, geophysics. It is monitored with the help of a P-6 controller that is connected by interface cable or via Bluetooth and also with the help of external Android device with special software eSurvey.
Part number:
Supplier:
Shvabe Description
Communication and data storage
USB v2.0: support for data download and high-speed connections
USB-radio modem with frequency rate 433-450 MHz
Built-in GSM-modem
External devices for receiving / transmitting data - via serial port, USB port and Bluetooth
Internal memory 256 Mb, + slot MicroSD, up to 8 Gb
Scope of delivery
MP-8 smart antenna
A network adapter with a set of adapters (for connection to power grids in the Russian Federation)
Rechargeable battery
Charger
VHF antenna
GSM antenna
Tape-measure
Screwdriver
Cable for data reception and transmission
Stand for fastening the smart antenna
Transport case
Passport
StaticToRinex Software (on CD)
GGO Software (on CD)
Field controller P-6
Rechargeable battery (for P-6)
Charger (for Р-6)
Adapter to the charger with a set of adapters (for P-6)
USB cable (for Р-6)
Quick connection cable (for P-6)
StaticToRinex (on CD)
GGO (on CD)
Shvabe eSurvey (on CD)
Instruction manual (on CD).
Software
The smart antenna comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.
Produced at JSC “Production Association “Ural Optical and Mechanical Plant” named after E.S.Yalamov”
USB v2.0: support for data download and high-speed connections
USB-radio modem with frequency rate 433-450 MHz
Built-in GSM-modem
External devices for receiving / transmitting data - via serial port, USB port and Bluetooth
Internal memory 256 Mb, + slot MicroSD, up to 8 Gb
Scope of delivery
MP-8 smart antenna
A network adapter with a set of adapters (for connection to power grids in the Russian Federation)
Rechargeable battery
Charger
VHF antenna
GSM antenna
Tape-measure
Screwdriver
Cable for data reception and transmission
Stand for fastening the smart antenna
Transport case
Passport
StaticToRinex Software (on CD)
GGO Software (on CD)
Field controller P-6
Rechargeable battery (for P-6)
Charger (for Р-6)
Adapter to the charger with a set of adapters (for P-6)
USB cable (for Р-6)
Quick connection cable (for P-6)
StaticToRinex (on CD)
GGO (on CD)
Shvabe eSurvey (on CD)
Instruction manual (on CD).
Software
The smart antenna comes with built-in software. This software allows to carry out the measurement in the field. The software also includes post-processing software: "StaticToRinex" and "GEO Geomatics Office" (GGO), installed on a PC. This software provides for the smart antenna modules interfacing, setting up and controlling the workflow, storing and transmitting the measurement results, and post-processing of the measured data. Software protection against unintentional and deliberate changes corresponds to the "High" level in accordance with R 50.2.077-2014.
Produced at JSC “Production Association “Ural Optical and Mechanical Plant” named after E.S.Yalamov”
Specification
1. Catalogue_Surveying_equipment_UOMP_(1).pdf2. ГЕОДЕЗИЧЕСКОЕ_ОБОРУДОВАНИЕ.pdf