The installation is intended for the development of positive photoresist on the substrate by centrifuging. Installation can be used independently and as part of the line. The unit is manufactured in climatic version UHL 4.1 according to GOST 15150-69. The unit is powered from an AC mains with a voltage of 220V and a frequency of 50 Hz. The requirement for the quality of electrical energy according to GOST 13109-87. The installation provides operation when compressed air is supplied in accordance with GOST 17433 under pressure of 3 * 105 Pa, 3kgs / cm2.

The installation is intended for applying a positive photoresist on a substrate by centrifuging. Installation can be used independently and as part of the line. The unit is manufactured in climatic version UHL 4.1 according to GOST 15150-69. The unit is powered from an AC mains with a voltage of 220V and a frequency of 50 Hz. The requirement for the quality of electrical energy according to GOST 13109-87. The installation provides operation when compressed air is supplied in accordance with GOST 17433 under pressure of 3 * 105 Pa, 3kgs / cm2.

The installation is intended for applying a negative photoresist on a substrate by centrifuging. Installation can be used independently and as part of the line. The unit is manufactured in climatic version UHL 4.1 according to GOST 15150-69. The unit is powered from an AC mains with a voltage of 220V and a frequency of 50 Hz. The requirement for the quality of electrical energy according to GOST 13109-87. The installation provides operation when compressed air is supplied in accordance with GOST 17433 under pressure of 3 * 105 Pa, 3kgs / cm2.

A set of equipment for the techno-chemical processing of substrates in the production of microstrip boards consisting of: Gold chemical deposition line; Copper surface preparation line before applying photoresist on conductor layers and before gilding; Pickling line resistive layers; Line of chemical preparation of substrates before deposition of resistive and conductive layers; Line preliminary chemical preparation of substrates before spraying.

"LinteL LIMS” laboratory information management system is a software for quality control laboratories, which is intended for automation of laboratory activities and reduction of costs for testing.

LinteL ATV-21 Automatic closed cup tester Pensky – Martens method Standards implemented GOST R EN ISO 2719-2008 GOST ISO 2719-2013 GOST 6356-75

LinteL ATVO-21 Automatic open cup tester (with gas ignition) Cleveland method Standards implemented GOST 4333-2014 GOST 33141-2014 ASTM D-92 ISO 2592-73

LinteL KISH-20М4 AUTOMATIC SOFTENING POINT TESTER FOR PETROLEUM BITUMEN Standards implemented GOST 11506-73 GOST 33142-2014

The electrolysis unit UR.R-8-2 is intended for the preparation and dispensing of sodium hypochlorite solution, obtained from the sodium chloride solution by electrolysis. Sodium hypochlorite is fed to the block of microfilters. Dose for active chlorine 3 mg / l. At a dose of 3 mg / l, 75 liters of sodium hypochlorite solution are needed per day.

Low wear and high cutting ability. High rigidity. A wide range of processed materials. Various concentrations of diamond grains are possible to achieve the best cutting quality.