The installation is intended for applying a negative photoresist on a substrate by centrifuging. Installation can be used independently and as part of the line. The unit is manufactured in climatic version UHL 4.1 according to GOST 15150-69. The unit is powered from an AC mains with a voltage of 220V and a frequency of 50 Hz. The requirement for the quality of electrical energy according to GOST 13109-87. The installation provides operation when compressed air is supplied in accordance with GOST 17433 under pressure of 3 * 105 Pa, 3kgs / cm2.

LinteL ATV-21 Automatic closed cup tester Pensky – Martens method Standards implemented GOST R EN ISO 2719-2008 GOST ISO 2719-2013 GOST 6356-75

LinteL ATVO-21 Automatic open cup tester (with gas ignition) Cleveland method Standards implemented GOST 4333-2014 GOST 33141-2014 ASTM D-92 ISO 2592-73

LinteL KISH-20М4 AUTOMATIC SOFTENING POINT TESTER FOR PETROLEUM BITUMEN Standards implemented GOST 11506-73 GOST 33142-2014

The electrolysis unit UR.R-8-2 is intended for the preparation and dispensing of sodium hypochlorite solution, obtained from the sodium chloride solution by electrolysis. Sodium hypochlorite is fed to the block of microfilters. Dose for active chlorine 3 mg / l. At a dose of 3 mg / l, 75 liters of sodium hypochlorite solution are needed per day.

Work with plates with a diameter up to 200 mm. Uniform stretching of film carrier in all directions. Heating the desktop. Ease of use and maintenance.

Exposure of plates with a diameter up to 200 mm. Safe source of ultraviolet radiation. Ease of use and maintenance.

We bring to your attention the Commercial Proposal for the supply of a complete set of equipment for creating a workshop / production line for the production of single / double-sided, as well as multilayer printed circuit boards.

Horizontal line of manifestation of protective soldering mask for the production of products with automatic adjustment :eight); possesses the possibility of preventive maintenance and replacement of elements of the transport system, nozzles, spray pipes and heaters without draining the solutions;